If you’re outfitting a theater, concert venue, broadcast studio, or entertainment venue with stage rigging equipment, you’ve likely come across the name Coreat. But what exactly is a COREAT stage hoist, and how do you know which model is right for your project?
This guide covers everything you need to know — from how COREAT hoists are built to the key differences between each series in our lineup.
What Is a COREAT Hoist?
A COREAT hoist is a professional-grade electric chain hoist designed and manufactured by Guangdong Coreat Entertainment Equipment Co., Ltd., a stage equipment manufacturer based in Guangzhou, China. Founded in 2012, Coreat focuses exclusively on two product categories: stage electric chain hoists and the intelligent controllers that operate them.
Unlike general-purpose industrial hoists, COREAT stage hoists are engineered specifically for entertainment environments. That means low-noise motors, precise speed control, safety-rated chains, and control systems that integrate cleanly with professional stage setups. Every COREAT hoist is CE certified and manufactured under ISO 9001 quality management.
How COREAT Stage Hoists Are Made
All COREAT hoists are produced in-house at a 5,000 m² factory in Guangzhou. The manufacturing process covers the full product lifecycle: R&D and engineering, mechanical fabrication, electronic control system assembly, quality inspection, and export logistics. Because we manufacture everything ourselves, there are no third-party components that could compromise consistency or safety.
Key construction features across the COREAT hoist range include:
- High-strength aluminum alloy housing — maximizes strength while minimizing suspended weight
- Grade 80 lifting chain — independently load-tested and rated for the full capacity at all operating temperatures
- Overload protection — mechanical safety device that disengages the drive before dangerous loads are exceeded
- Upper and lower limit switches — automatic stop at end-of-travel to prevent chain over-run
- Low-noise motor design — critical for venues where audio is a priority during operation
The COREAT Stage Hoist Range: Which Series Is Right for You?
Coreat produces eight hoist models across three series, each designed for a distinct application category.
C Series — Single-Speed Fixed Installation
The C10 (1000 kg) and C20 (2000 kg) are single-speed chain hoists built for permanent stage installations. If your venue has fixed rigging points that are pre-set before each performance and don’t need to move during a show, the C Series delivers reliable, no-nonsense performance at a competitive price. These are the workhorses of small and mid-size theaters, hotel ballrooms, and broadcast studios.
V Series — Variable Speed
The V Series is where COREAT stage hoists step up for live performance. Available in four capacity ratings — V02/V02 PLUS (250 kg), V05/V05 PLUS (500 kg), and V10/V10 PLUS (1,000 kg) — these hoists offer adjustable speed control so operators can make precise movements during a live show. The ‘PLUS’ variants include upgraded motors and electronics for higher duty cycles and more demanding production environments.
Intelligent CNC Series — Fully Programmable
The Intelligent CNC Hoist is Coreat’s flagship product. Paired with Coreat’s proprietary CNC multi-unit controller, it allows you to pre-program complex lifting sequences, synchronize up to 100+ units simultaneously, and achieve position accuracy of ±5 mm. This is the system behind kinetic LED ceilings, automated fly systems, and immersive attraction rigging across Asia, the Middle East, and Europe.
COREAT Hoist Controllers: Completing the System
Every COREAT hoist works as part of a complete system. Coreat produces three controller options to match each hoist series:
- Pendant Controller — standard push-button up/down for C-series and E-series fixed installations
- Variable Speed Console — real-time speed control for the V-series during live show operation
- CNC Multi-Unit Controller — Coreat’s proprietary CNC console for the Intelligent Series, with cue programming, real-time position monitoring, and multi-unit synchronization
Because Coreat designs the hoist and controller together, compatibility is guaranteed — there’s no risk of mismatched hardware or control protocol issues.
Who Uses COREAT Stage Hoists?
COREAT hoists are specified by rigging engineers, production companies, venue operators, and system integrators across more than 100 countries. Typical clients include:
- Theaters, opera houses, and auditoriums installing or upgrading fly systems
- Concert touring companies specifying variable-speed hoists for truss and speaker rigging
- Broadcast studios fitting studio lighting grids with quiet, repeatable hoists
- Nightclubs and entertainment bars building kinetic LED ceiling installations
- Theme parks and immersive entertainment attractions requiring synchronized aerial effects
How to Get a Quote for a COREAT Stage Hoist
Ordering a COREAT hoist is straightforward. Contact Coreat directly at [email protected] or through the website’s quote form. To get an accurate quote, have the following information ready: the number of hoists needed, required load capacity per hoist, venue ceiling height and rigging point layout, power supply availability (voltage/phase), and whether you need a controller and what type of control is required.
Coreat responds within 24 hours and can advise on model selection, chain length customization, and controller configuration for your specific project.
Summary
A COREAT stage hoist is a purpose-built, CE-certified electric chain hoist designed for professional entertainment rigging — available in eight models from 100 kg to 2,000 kg, with matching controllers for every application. Whether you need a simple fixed hoist for a small theater or a fully synchronized 100-unit CNC system for a kinetic attraction, the COREAT hoist range has the solution.